Allied Telesis AT-PC232/POE - Manual (Page 39)

AT-PC232/POE Media Converter Installation Guide
39
Desktop Installation
Install the AT-PC232/POE Media Converter on a desktop, perform the
following procedure:
1. Remove the converter from its shipping container and store the
packaging material in a safe location.
2. Turn the converter over and place it on a secure surface.
3. Attach the four rubber feet included with the unit to the corners of the
bottom of the media converter, as shown in Figure 6.
Figure 6. Attaching Rubber Feet
Do not apply power at this time. Proceed to “Wall-Mount Installation” on
page 40.
1362