Allied Telesis AT-PC232/POE - Manual (Page 36)

Chapter 2: Installation
36
Selecting a Site When selecting a site for your AT-PC232/POE Media Converter, observe
the following guidelines:
❒
Select a site that is dust-free and moisture-free.
❒
The site should allow for easy access to the fiber optic and twisted pair
cables and to the power cord.
❒
If the media converter will be installed on a table, the table should be
level and secure.
❒
Do not place objects on top of the media converter.
❒
Air flow around the unit and through its vents should be unrestricted.
❒
The power outlet for the device should be located near the unit and be
easy to access.
❒
Use a dedicated power circuit or power conditioner to supply reliable
power to the unit.
Reviewing the
Safety Guidelines
Please review the following safety guidelines before you begin to install
the AT-PC232/POE Media Converter.
Note
The indicates that a translation of the safety statement is
available in a PDF document titled “Translated Safety Statements”
(613-000990) posted on the Allied Telesis website at
www.alliedtelesis.com. This document is also included with the
documentation CD that is shipped with the product.
Warning: Class 1 Laser product. L1
Warning: Do not stare into the laser beam. L2
Warning: Class 1 LED product. L3
Warning: The fiber optic ports contain a Class 1 laser device.
When the ports are disconnected, always cover them with the
provided plug. Exposed ports may cause skin or eye damage
L4