Allied Telesis AT-PC232/POE - Manual (Page 20)

Chapter 1: Overview
20
100Base-FX Fiber Optic Port
The AT-PC232/POE Media Converter features a single fiber optic port.
Type of
Connector
The fiber optic port features a duplex SC connector.
Port Speed
The fiber optic port has a fixed operating speed of 100 Mbps. The end-
node connected to the port must also be able to operate at 100 Mbps. This
speed cannot be changed.
Duplex Mode
The fiber optic port can operate in either full-duplex or half-duplex mode.
You can set the duplex mode manually using the DIP switches after
turning Auto-Negotiation off or you can let the media converter set it
automatically with Auto-Negotiation turned on.
Maximum
Distance
The fiber optic port has a maximum operating distance of 2 Km (1.2 mi) in
full duplex mode. The maximum operating distance of the port will be less
if it is operating in half-duplex mode.
Type of Cable
The fiber optic port on the AT-PC232/POE Media Converter uses multi-
mode fiber optic cable.
Optical Output
Power
Refer to “100Base-FX Port 1 Specifications” on page 55.
Optical Receiver
Sensitivity
Refer to “100Base-FX Port 1 Specifications” on page 55.