Allied Telesis AT-PC2002/POE - Manual (Page 40)

Chapter 2: Installation
40
Warning: Operating Temperature. This product is designed for a
maximum ambient temperature of 40° degrees C.
E7
All Countries: Install product in accordance with local and
National Electrical Codes.
E8
Warning: Only trained and qualified personnel are allowed to
install or to replace this equipment.
E14
Caution: Do not install in direct sunlight, or a damp or dusty
place.
E16
Circuit Overloading: Consideration should be given to the
connection of the equipment to the supply circuit and the effect
that overloading of circuits might have on overcurrent protection
and supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this
concern.
E21
Warning: Do not look directly at the fiber optic cable ends or
inspect the cable ends with an optical lens.
E29
Warning: To reduce the risk of electric shock, the PoE port on
this product must not connect to cabling that is routed outside
the building where this device is located.
E40
Caution: The unit does not contain serviceable components.
Please return damaged units for servicing.
Caution: The AT-PC2002/POE Ethernet Media Converter is
only intended for installation in Environment A as defined in IEEE
802.3af. All interconnected equipment must be contained in the
same building including the interconnected equipment’s
associated LAN connections.
Caution: During normal operations, the SFP module may have a
case temperature that exceeds 70° C (158° F). If you remove the
module, exercise caution when handling with unprotected hands.