Allied Telesis AT-PC2002/POE - Manual (Page 19)

AT-PC2002/POE Media Converter Installation Guide
19
Type of Cabling Table 1 lists the cable specifications for the twisted pair port.
Auto
MDI/MDI-X
The wiring configuration of the twisted pair port is set automatically with
auto-MDI/MDI-X. Consequently, you can use a straight-through twisted
pair cable to connect any type of Ethernet network device to the port. The
auto-MDI/MDI-X feature is always active, even when the Auto- Negotiation
feature is turned off and the speed and duplex mode on the port are set
manually.
Table 1. Twisted Pair Cabling and Distances
Speed Cable Type
Maximum
Operating
Distance
10 Mbps Standard TIA/EIA 568-B-compliant
Category 3 or better shielded or
unshielded cabling with 100 ohm
impedance and a frequency of 16
MHz. 100 m (328 ft)
100 Mbps Standard TIA/EIA 568-A-compliant
Category 5 or TIA/EIA 568-B-
compliant Enhanced Category 5
(Cat 5e) shielded or unshielded
cabling with 100 ohm impedance
and a frequency of 100 MHz. 100 m (328 ft)
1000 Mbps Standard TIA/EIA 568-A-compliant
Category 5 or TIA/EIA 568-B-
compliant Enhanced Category 5
(Cat 5e) shielded or unshielded
cabling with 100 ohm impedance
and a frequency of 100 MHz. 100 m (328 ft)