Allied Telesis AT-GS950/48 - Manual (Page 43)

AT-GS950/48 Gigabit Ethernet WebSmart Switch Installation Guide
43
4. Slide the SFP transceiver into an SFP slot on the switch, as shown in
Figure 12.
Figure 12. Inserting the SFP Transceiver
5. Repeat steps 2 through 4 if you are installing other SFP transceivers.
Note
SFP transceivers are dust sensitive. When a fiber optic cable is not
installed, or when you store the SFP transceiver, always keep the
plug in the optical bores. When you do remove the plug, keep it for
future use. Refer to “Cleaning Fiber Optic Connectors” on page 55 if
fiber connections require cleaning.
Note
Unnecessary removal and insertion of an SFP transceiver can lead
to premature failure.
For information about cabling for the SFP transceiver, consult the
documentation that was shipped with the SFP module.
1752