Allied Telesis AT-GS950/48 - Manual (Page 18)

Chapter 1: Overview
18
Features
The features of the AT-GS950/48 Gigabit Ethernet Smart switch include:
ˆ 44 Auto-Negotiating 10/100/1000Base-T twisted pair ports (1 - 44) with
RJ-45 connectors
ˆ Four uplink combo ports consisting of 100FX/1000SX/LX SFP ports
(45 - 48) with four Auto-Negotiating redundant 10/100/1000Base-T
twisted pair ports (45R - 48R) with RJ-45 connectors
ˆ Store and Forward switching supports line rates of
– 1,480,000 pps (1000 MB/sec)
– 148,000 pps (100 MB/sec)
– 14,800 pps (10 MB/sec)
ˆ Jumbo frames suported up to 10 KB
ˆ Non-Blocking Full-Wire speed switching on all packet sizes
ˆ MAC address table capacity of up to 8K addresses with automatic
aging
ˆ IEEE 802, IEEE 802.3u, and IEEE802.3z
ˆ IEEE 802.3 and IEEE 802.3u compliant
ˆ IEEE 802.3x supports”
– Flow Control in full-duplex operation
– Back Pressure in half-duplex operation
– Auto MDI/MDI-X on all twisted pair ports
(including combo ports)
ˆ Eco-friendly switch for enabling/disabling port LEDs and for resetting
switch
ˆ Minimizes transmit signal power on each GE port based on the
specific cable length to the end point
ˆ Each port assumes low power mode when link goes down
ˆ Installation on desktop, mounted on the wall, and mounted in a 19”
rack.
ˆ Smart Fan with fan speed control, device acoustic noise less than
40dB
ˆ Front panel LEDs for unit and port status
ˆ Web-based configuration using the AT-S106 Management software