Allied Telesis AT-GS950/48 - Manual (Page 33)

AT-GS950/48 Gigabit Ethernet WebSmart Switch Installation Guide
33
Cable Specifications
Twisted Pair
Ports
Table 5 contains the cabling specifications for the twisted pair ports.
Note
The twisted pair ports on the switch feature auto-MDI when
operating at 10, 100 or 1000 Mbps. Each port is individually
configured as MDI or MDI-X when connected to an end node.
Consequently, you can use either a straight-through or crossover
twisted pair cable when connecting any network device to a twisted
pair port on the switch.
SFP Ports
Refer to the Allied Telesis data sheet for the cable specifications of the
specific SFP transceiver that you are using.
Table 5. Twisted Pair Cabling and Distances
Speed Type of Cable
Maximum
Operating
Distance
10 Mbps Category 3 or better 100-ohm shielded or
unshielded twisted pair cable 100 m (328 ft)
100 Mbps Category 5 or Category 5E (Enhanced) 100-
ohm shielded or unshielded twisted pair cable 100 m (328 ft)
1000 Mbps Category 5 and Category 5E (Enhanced) 100-
ohm shielded or unshielded twisted pair cable 100 m (328 ft)