Allied Telesis x310 Series - Manual (Page 72)

Chapter 4: Installing the Switch on a Table or in an Equipment Rack
72
3. Turn the switch over.
4. Attach the two rack mount brackets to the sides of the switch with the
eight bracket screws that come with the unit.
The AT-x310-26FT Switch comes with one short bracket and one long
bracket. Allied Telesis recommends installing the short bracket on the
right side and the long bracket on the left side, as you face the front of
the unit, so that the stacking ports on the unit align with the same ports
on other x310 Series switches in the equipment rack. The possible
positions of the brackets are shown in Figure 25.
Figure 25. Installing Brackets on the AT-x310-26FT Switch
The bracket positions for the AT-x310-26FP, AT-x310-50FT, and AT-
x310-50FP Switches are shown in Figure 26 on page 73 and Figure 27
on page 74.