Allied Telesis x310 Series - Manual (Page 7)

7
Figure 1: Front Panels of the AT-x310-26FT and AT-x310-26FP Switches ......................................................................... 19
Figure 2: Front Panels of the AT-x310-50FT and AT-x310-50FP Switches ......................................................................... 20
Figure 3: Back Panel of the AT-x310-26FT Switches........................................................................................................... 21
Figure 4: Back Panel of the AT-x310-26FP and AT-x310-50FP Switches ........................................................................... 21
Figure 5: Back Panel of the AT-x310-50FT Switch............................................................................................................... 21
Figure 6: x310 Series Management Panel ........................................................................................................................... 22
Figure 7: AT-StackXS/1.0 Stacking Transceiver .................................................................................................................. 33
Figure 8: LEDs for the 10/100Mbps Ports on the AT-x310-26FT and AT-x310-50FT Switches........................................... 35
Figure 9: LEDs for the PoE 10/100Base-TX Ports on the AT-x310-26FP and AT-x310-50FP Switches ............................. 37
Figure 10: LEDs for the 10/100/1000Base-T Ports............................................................................................................... 39
Figure 11: SFP Slot LEDs .................................................................................................................................................... 40
Figure 12: Switch ID LED ..................................................................................................................................................... 41
Figure 13: Switch ID LED ..................................................................................................................................................... 42
Figure 14: Switch ID LEDs in the Low Power Mode ............................................................................................................. 42
Figure 15: AT-StackXS/1.0 Stacking Transceiver ................................................................................................................ 49
Figure 16: Stack of Two Switches in the Linear Topology.................................................................................................... 50
Figure 17: Stack of Four Switches in the Linear Topology ................................................................................................... 51
Figure 18: Stack of Two Switches in the Ring Topology ...................................................................................................... 52
Figure 19: Stack of Four Switches in the Ring Topology...................................................................................................... 53
Figure 20: PORT Parameter in the Command Line Interface............................................................................................... 56
Figure 21: Components of the Switches............................................................................................................................... 65
Figure 22: Components of the AT-x310-26FT Switch ..........................................................................................................66
Figure 23: Turning the Switch Upside Down ........................................................................................................................ 71
Figure 24: Removing the Rubber Feet ................................................................................................................................. 71
Figure 25: Installing Brackets on the AT-x310-26FT Switch................................................................................................. 72
Figure 26: Attaching Brackets to the AT-x310-26FP, AT-x310-50FT, or AT-x310-50FP Switch.......................................... 73
Figure 27: Attaching Brackets to the AT-x310-26FP, AT-x310-50FT, or AT-x310-50FP Switch (Continued) ...................... 74
Figure 28: Mounting the Switch in an Equipment Rack ........................................................................................................ 75
Figure 29: Connecting the Management Cable to the Console Port .................................................................................... 79
Figure 30: User Exec Mode Prompt ..................................................................................................................................... 80
Figure 31: Moving to the Privileged Exec Mode with the ENABLE Command ..................................................................... 80
Figure 32: Moving to the Global Configuration Mode with the CONFIGURE TERMINAL Command .................................. 80
Figure 33: Activating VCStack with the STACK ENABLE Command................................................................................... 81
Figure 34: Returning to the Privileged Exec Mode with the EXIT Command ....................................................................... 81
Figure 35: Saving the Change with the WRITE Command .................................................................................................. 81
Figure 36: Rebooting the Switch with the REBOOT Command ........................................................................................... 81
Figure 37: Removing the Dust Plug from the S1 Slot ........................................................................................................... 84
Figure 38: Removing the Dust Cover from the AT-StackXS/1.0 Transceiver....................................................................... 85
Figure 39: Installing the AT-StackXS/1.0 Transceiver in Slot S1.......................................................................................... 85
Figure 40: Removing the Dust Plug from the S2 Slot ........................................................................................................... 86
Figure 41: Installing the AT-StackXS/1.0 Transceiver in Slot S2.......................................................................................... 87
Figure 42: Installing the Retaining Clip ................................................................................................................................. 90
Figure 43: Plugging in the AC Power Cord........................................................................................................................... 92
Figure 44: Lowering the Retaining Clip................................................................................................................................. 93
Figure 45: SHOW STACK Command................................................................................................................................... 96
Figure 46: Moving to the Global Configuration Mode with the CONFIGURE TERMINAL Command .................................. 97
Figure 47: Returning to the Privileged Exec Mode ............................................................................................................... 98
Figure 48: Saving the Priority Values with the WRITE Command........................................................................................ 98
Figure 49: Switch Initialization Messages............................................................................................................................. 99
Figures