Allied Telesis x310 Series - Manual (Page 36)

Chapter 1: Overview
36
LEDs for the PoE
10/100Mbps
Twisted Pair
Ports
The PoE 10/100Mbps twisted pair ports on the AT-x310-26FP and AT-
x310-50FP Switches have two LEDs that display link, activity and PoE
information. The LEDs are shown in Figure 9 on page 37.
Note
The duplex mode information for the ports on the AT-x310-26FP and
AT-x310-50FP Switches is available from the management
software.
Table 5. LEDs on the 10/100Base-TX Ports on the AT-x310-26FT and
AT-x310-50FT Switches
LED State Description
Link/
Activity
LED
Solid Green A port has established a 100 Mbps link to a
network device.
Flashing
Green A port is transmitting or receiving data at
100 Mbps.
Solid Amber A port has established a 10 Mbps link to a
network device.
Flashing
Amber A port is transmitting or receiving data at 10
Mbps.
Off A port has not established a link with
another network device or the LEDs are
turned off. To turn on the LEDs, use the
eco-friendly button.
Duplex
Mode
LED Solid Green A port is operating in full duplex mode.
Solid Amber A port is operating in half-duplex mode.
Flashing
Amber Collisions are occurring on a port.