Allied Telesis x310 Series - Manual (Page 18)

Chapter 1: Overview
18
LEDs Here are the port LEDs:
 Link/activity and duplex mode LEDs for the twisted pair ports on
non-PoE switches
 Link/activity and PoE status LEDs for the twisted pair ports on PoE
switches
 Link/activity LEDs for SFP and SFP+ slots
 Switch ID number LED
 eco-friendly button turns off the LEDs to conserve electricity
Installation
Options
Here are the installation options for the switches of a stack:
 19-inch equipment rack
 Desk or tabletop
Note
The switches come with wall anchors and screws. Allied Telesis
does not recommend installing the switches of a stack on a wall.
Instead, they should be installed in an equipment rack or on a table.
MAC Address
Table
Here are the basic features of the MAC address tables of the switches:
 Storage capacity of 16,000 dynamic MAC address entries
 Storage capacity of 256 static MAC address entries
 Automatic learning and aging
Management
Software and
Interfaces
Here are the management software and interfaces:
 AlliedWare Plus Management Software
 Command line interface
 Web browser interface
Management
Methods
Here are the methods for managing the switches:
 Local management through the Console port
 Remote Telnet and Secure Shell management
 Remote HTTP and HTTPS web browser management
 SNMPv1, v2c, and v3