Allied Telesis IE200 Series - Manual (Page 68)

Appendix A: Technical Specifications
AT-IE200 Series Installation Guide 68
Input Voltages
Note
A 24V PSU must have an absolute minimum tolerance of -3% or 23.25V at the input to the switch.
A 48V PSU must have an absolute maximum tolerance of +2.5% or 49.25V at the input to the switch.
Certifications
RJ-45 Twisted Pair Port Pinouts
Figure 16 illustrates the pin layout of the RJ-45 connectors and ports.
Table 15: Input Voltages
AT-IE200-6GT
AT-IE200-6FT 12-48 VDC, 2.5A maximum
AT-IE200-6GP
AT-IE200-6FP 24-48 VDC, 7.0A maximum
Table 16: Product Certifications
RMI Emissions FCC Part 15B Class A
EN55022:2010 Class A
EN61000-3-
2:2006+A1:2009+A2:2009
EN61000-3-3:2008
VCCI- Class A
RFI Immunity EN55024:2010
EN61000-4-2:2009
EN61000-4-3:2006 + A2:2010
EN61000-4-4:2012
EN61000-4-5:2006
EN61000-4-6:2009
EN61000-4-8:2010
EN61000-4-11:2004
Electrical and Laser Safety UL/E/IEC60950-1
CSA 22.2:60950-1
2006/95/EC Low Voltage Directive
All Allied Telesis approved SFP
modules EN60825-1
EN60825-2
EN/IEC/UL60950-1
FCC CDRH registered