Allied Telesis IE200 Series - Manual (Page 40)

Chapter 2: Beginning the Installation
AT-IE200 Series Installation Guide 40
Warning
This unit might have more than one power cord. To reduce the risk of electric shock, disconnect all
power cords before servicing the unit.
 E30
Caution
The unit does not contain serviceable components. Please return damaged units for servicing.  E42
Warning
This equipment shall be installed in a Restricted Access location.
 E45
Warning
When the unit is operational it will be hot. Exercise caution when handling with unprotected hands.
Warning
Per NEC section 800.90 all exposed cables, service wires, or drops when entering a building must have
primary over voltage protection if they are classified as exposed plant.
Note
This equipment meets EN61000-4-5 Class 3 on the DC input and Class 2 on the ETHERNET I/O lines.
Warning
Allied Telesis does not warrant against lightening or power surges causing damage to the device. Such
damage will be the responsibility of the equipment owner.