Reviewing safety precautions – Allied Telesis IE200 Series User Manual
Page 38
Chapter 2: Beginning the Installation
AT-IE200 Series Installation Guide
38
Reviewing Safety Precautions
Review the following safety precautions before you install the switch.
Note
The
indicates that a translation of the safety statement is available in a PDF document titled
“Translated Safety Statements” (613-000405) on the Allied Telesis website at
Warning
Class 1 Laser product.
L1
Warning
Do not stare into the laser beam.
L2
Warning
Do not look directly at the fiber optic cable ends or inspect the cable ends with an optical lens.
L6
Warning
For all Allied Telesis approved SFP models:
Laser Radiation.
Do not view directly with optical instruments.
Class 1 Laser product.
Rayonnement Laser.
Ne pas observer directement à l’aide d’instruments d’optique.
Appareil à Laser de classe 1.
Warning
To prevent electric shock, do not remove the cover. No userserviceable parts inside. This unit
contains hazardous voltages and should only be opened by a trained and qualified technician. To avoid
the possibility of electric shock, disconnect electric power to the product before connecting or
disconnecting the LAN cables.
E1