Allied Telesis AT-GS950/10PS - Manual (Page 39)

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide
39
Caution
Air vents must not be blocked and must have free access to the
room ambient air for cooling.
 E6
Warning
Operating Temperature. This product is designed for a maximum
ambient temperature of 40° degrees C.
 E7
Note
All Countries: Install product in accordance with local and National
Electrical Codes.
 E8
Caution
Circuit Overloading: Consideration should be given to the
connection of the equipment to the supply circuit and the effect that
overloading of circuits might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment nameplate
ratings should be used when addressing this concern.
 E21
Warning
Mounting of the equipment in the rack should be such that a
hazardous condition is not created due to uneven mechanical
loading.
 E25
Note
If installed in a closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may be greater than
the room ambient temperature. Therefore, consideration should be
given to installing the equipment in an environment compatible with
the manufacturer’s maximum rated ambient temperature (Tmra).

E35
Caution
Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not
compromised.
 E36