Allied Telesis AT-GS950/10PS - Manual (Page 17)

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide
17
LEDs Here is a brief description of the port LEDs:

Power LED/SYS; refer to “PWR/SYS LEDs” on page 24.

Speed and link/activity LEDs for the twisted pair ports; refer to “10/
100/1000 BaseT Link Activity LEDs” on page 26.

Link/activity LEDs for the SFP slots; refer to “SFP LEDs” on
page 28.

ecoFriendly button turns off the LEDs to conserve electricity; refer
to “PoE LEDs” on page 30.
Installation
Options
The AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS switches
can be installed in the following ways:

Rack mounted in a 19-inch equipment rack

Mounted on a Desk or tabletop

Wall mounted for the AT-GS950/10PS and AT-GS950/16PS only
Power
Conservation
The AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS switches
have the following power conservation features:

eco-Friendly button to turn off the port LEDs when the system is
not being monitored

High-efficiency power supply

Power scaling based on traffic loads on ports operating at 1000
Mbps (port power scaling not available at 10 or 100 Mbps)

Power shutdown on unused ports
MAC Address
Table
Here are the basic features of the MAC address table:

Storage capacity up to 16KB MAC address entries

Automatic learning and aging