Allied Telesis AT-GS950/10PS - Manual (Page 33)

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide
33
eco-Friendly Button
The eco-Friendly button serves multiple functions. See Figure 17 for its
location.
By pressing this button, you can:

Toggle the front panel LEDs on and off to conserve electricity when
you are not physically monitoring the switch.

Reboot your switch while maintaining the current configuration

Reset your switch configuration to the factory default values.
Figure 17. eco-Friendly Button
Note
The eco-Friendly button does not control the Power LED.
eco-Friendly
Button Operation
The button operates as follows:

Conserve energy: When you press the eco-Friendly button for 1 to
4 seconds, the front panel port LEDs are disabled. You may use
the button to turn off the LEDs when you are not monitoring the
switch. To turn the port LEDs on, press the eco-Friendly button for
1 to 4 seconds again. Toggling the LEDs does not affect the
network operations of the switch.

Reboot the switch: By pressing the button for 5 to 9 seconds, you
can initiate a software reboot of the switch.

Reset the switch to factory default settings: By pressing the button
for more than 10 seconds, you initiate a software reboot of the
switch followed by a reset of the switch to its factory settings.
eco-Friendly
Button