Aiphone FK1629 B 0811YZ - Manual (Page 25)

25
GETTING STARTED
USING THE SYSTEM
APPENDIX
SETTING THE SYSTEM
Setting the timer [Timer setting]
Set the time for each operation.
Click 1 Timer setting in the table of contents.
Set the time for the following operations respectively. 2
The setting range is displayed on the right side of each *
input box.
[Call]: •
Set the duration of call from door stations to [Normal],
[Priority] or [Urgent].
[Communication]: •
Set the duration of communication between stations in
the system including between remote sites [Via IP].
[In Local] and [Telephone]: Not available in a network *
direct system.
[Paging]: •
Set the duration of paging.
[Monitor]: •
Set the duration of monitoring only one station.
[Scan monitor: Switching]: •
Set the duration of monitoring each station while scan-
monitoring.
NOTE:
The actual duration slightly differs from the setting value.
[Contact output]: •
(Not available)
[Door release]: •
Set the duration of door release.
If you set the time to “0”, the door is released while *
the door release button on the master station is held
down.
Click 3 Temporarily stored to save the current setting
results temporarily.
If you wish to cancel the setting results you have made, *
click a title in the table of contents or “Refresh” in the
web browser menu.