Samsung SCH-U706HBAATL - Manual (Page 133)

Changing Your Settings 130
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Store Emergency Numbers
1. In standby mode, press the MENU key ( ), then press
(for Settings), (for Phone Settings), and
for Security. You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2. Enter the lock code, then press for Emergency #.
3. Press , , or to select from the three
emergency number entries.
4. Enter an emergency number (up to 48 digits in length).
5. Press the key to save the number that you entered.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number.
2. Press the key to place the call.
Reset Phone
Reset Phone returns all setup options to their factory default.
1. In standby mode, press (for Settings), (for
Phone Settings), and for Security. You’re prompted to
enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2. Enter the lock code, the press for Reset Phone. A
prompt appears in the display asking if you wish to restore
default settings (except for the Contacts and Voice Dial).
3. Press the Yes (left) soft key ( ) to restore default settings
or press the No (right) soft key ( ) to return to the
Security sub-menu.
Erase All Contacts
Erase memory erases your Contacts and Group information
(except Default). This feature is useful if you want to give your
phone to someone else.
1. In standby mode, press the MENU key ( ), then press
(for Settings), (for Phone Settings), and