Samsung SCH-U540MSAVZW - Manual (Page 16)

13
Digital signal strength: Appears when your phone is receiving
digital data. Appears when your phone is on and indicates the
current signal strength. More bars indicate a stronger signal.
Standalone Mode: Appears when Standalone Mode is on.
When on, all RF functions for your phone are disabled, and you
cannot use your phone to place or receive calls.
Roaming: Your phone is outside your home area. While
roaming, another wireless provider may be handling your call.
The service rate for the call may be higher than those made
from within your home area. Please refer to Verizon Wireless for
roaming rates.
Voice Privacy: Prevents eavesdropping over a CDMA traffic
channel.
No service: Your phone cannot find a signal because you’re
outside a service area. You cannot make or receive calls. Wait
for a signal or move to an open area to find a signal. This
indicator always appears when you first turn on your phone and
disappears once service is located.
Dormant: Indicates no incoming or outgoing data.
Voice Call: Indicates a call in progress. When dialing a number,
this icon flashes until the call connects.
Data Call: Indicates a call in progress. When dialing a number,
this icon flashes until the call connects.
Location On: Global Positioning Service is set to On for location
and 911 calls.
Bluetooth: Indicates that Bluetooth wireless technology is
active.
Bluetooth Active: Indicates that Bluetooth wireless technology
is connected and receiving or pushing data.