Samsung SCH-L710RWBXAR - Manual (Page 130)

124
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly
via Wi-Fi, without a Wi-Fi network or hotspot, and without
having to set up the connection. For example, some printers
support Wi-Fi Direct, and you could print from your phone via
Wi-Fi Direct.
Configuring Wi-Fi Direct
For information on configuring Wi-Fi Direct, see “Configuring
Wi-Fi Direct” on page 138.
Turning Wi-Fi Direct On or Off
1. From the Home screen, touch Menu ➔ Settings.
The Settings screen appears.
2. Under Wireless and network, touch More settings.
3. Touch Wi-Fi Direct to turn Wi-Fi Direct On, or
touch Wi-Fi Direct to turn Wi-Fi Direct Off.
The Wi-Fi Direct screen appears, and your phone scans
for available Wi-Fi Direct devices and lists them under
Available devices.
AllShare Cast
AllShare Cast lets your phone share the contents of its
display with other Digital Living Network Alliance (DLNA)
certified devices, such as Smart televisions.
Note: To view more information about DLNA certified products
visit http://www.dlna.org/home .
1. Connect your phone and another DLNA certified device
to the same Wi-Fi network. (For more information, refer
to “Wi-Fi” on page 114.)
2. On your phone press Home, then touch
Menu ➔ Settings. The Settings screen appears.
3. Under Wireless and network, touch More settings. The
Wireless and networks screen appears.
4. Touch AllShare Cast. The AllShare Cast screen appears
with AllShare Cast already active and begins scanning
for available devices. All detected DLNA certified
devices are listed under Available devices.
5. Touch the desired device to establish a connection. You
can now view the contents of your phone’s display on
the connected device.