Samsung SC-D6040-AFS - Manual (Page 43)

ENGLISH
39 39
The Camcorder : Functions
✤ Displays the DATE / TIME on the LCD monitor while recording or playing a tape.
✤ The DATE / TIME setting works in both REC and PLAY modes.
1. Turn on your camcorder by setting the Power Switch to REC mode.
2. Press the MENU button.
The top menu including VIEWER is displayed.
3. Press the DOWN button to select VIEWER , then press the OK button.
The submenu including DATE/TIME is displayed.
4. Press the DOWN button to select DATE/TIME , then press the OK button.
The options available for DATE/TIME display are listed.
5. Select an option using the DOWN or UP button, then press the OK button.
The selected option is applied.
6. Press the MENU button to exit the menu screen.
✤ Date and Time information is automatically recorded on a special data area of the tape.
✤ The DATE/TIME will read - - - under the following conditions:
During playback of a blank section of a tape.
If the tape was recorded before setting the clock in Camcorder mode.
When the Lithium battery becomes weak or dead.
✤ Before setting the DATE/TIME, be sure to set the CLOCK. Refer to Setting the Clock in page 38.
Notes
Setting the DATE/TIME