Samsung SC-D6040-AFS - Manual (Page 105)

ENGLISH
101 101
The Camera : Basic Picture Taking
1. Turn your camera on by setting the Power Switch to (CAMERA) mode.
2. Turn the Mode Dial to set to (PLAY) mode.
A stored picture is displayed on the LCD monitor.
3. Press the MENU button.
The top menu including (SLIDE) is displayed.
4. Press the LEFT or RIGHT button to select (SLIDE), then press the DOWN button.
5. Press the DOWN or UP button to select INTERVAL , then press the RIGHT button.
The cursor is located on Interval.
6. Select an interval by pressing the UP or DOWN button.
The available range is 01 ~ 10 seconds.
7. Press the LEFT button and then press the DOWN button to select REPEAT.
8. Press the RIGHT button and select OFF or ON.
The REPEAT option is turned OFF or ON.
9. Press the LEFT button, then press the DOWN button.
START is selected.
10.Press the OK button to start the Slide Show. To pause the Slide Show, press the
(PLAY/STILL) button. To resume the Slide Show, press the (PLAY/STILL) button again.
11. To stop the Slide Show, press the OK or MENU button.
✤ Loading time may vary depending on the image size.
✤ The Slide Show will start from the current picture.
✤ For motion clips, only the first frame is displayed.
✤ TIFF images are not displayed by the Slide Show.
Viewing a Slide Show
EXIT:OK MOVE:
Notes