Asus GigaX User Manual

Page 94

[Reload]

Restores the previous saved settings from configuration file.

CLI command : l2 arl retrieve

[Show VLAN]

Displays the existing VLAN information of the switch.

CLI command : l2 vlan show

[Name]

[VLAN ID]

Allows user to config the VLAN settings. User may create a new VLAN by
giving a unique VLAN ID, a VLAN description name, and its port member list,
note that the port member here is indicated as tagged port member. To specify
a VLAN port member as untagged port, CLI command utportadd can achieve
this purpose. User may use CLI command add or remove to further add some
port members to a VLAN or exclude some existing port members from a
VLAN.

CLI command : l2 vlan create

CLI command : l2 vlan add

CLI command : l2 vlan remove

CLI command : l2 vlan utportadd

[DHCP Snoop]

Enable or disable DHCP snooping on this VLAN.

CLI command : l2 dhcpsnoop enable

CLI command : l2 dhcpsnoop disable

[Remove VLAN]

Allows user to completely destroy an existing VLAN.

CLI command : l2 vlan delete

This manual is related to the following products:

GigaX3024X