Asus GigaX - Manual (Page 83)

GigaX Series L3 Managed Switch User Guide
83
[System Contact]
Displays the detail information of contact about the switch. This is an
RFC-1213 defined MIB object in System Group, and provides contact
information on the managed node.
CLI command : sys info contact
If you put the contact description in the contact description field, the switch
contact will change to the new one.
[System Location]
Displays the physical location of the switch. This is an RFC-1213 defined MIB
object in System Group, and provides the location information on the managed
node.
CLI command : sys info location
Type in the location description in the location description field to change the
location.
Figure 51. SYS commands