Asus GigaX - Manual (Page 91)

GigaX Series L3 Managed Switch User Guide
91
CLI command : l2 mirror egress
CLI command : l2 mirror remove
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 mirror retrieve
[Show Multicast Group]
Displays the static multicast groups that are presented in the multicast
group table.
CLI command: l2 mcast show
[Set Multicast Group]
Allows user to add or modify a static multicast group by specifying the MAC
address, VLAN ID, Class of Service, VLAN port members, and its untagged
port members. Note that MAC address and VLAN ID combination is formed as
a unique entry in multicast group table.
CLI command: l2 mcast set
mac address [format: xx:xx:xx:xx:xx:xx]:
vlan id [1 by default]:
cos [0-7, 0 by default]:
port list [format: 1 2 3 4-26/* for all ports]:
untagged port list [format: 1 2 3 4-26/* for all ports]:
[Remove Multicast Group]
Allows user to delete a static multicast group entry from multicast group table
by given a MAC address and VLAN ID.
CLI command : l2 mcast delete
mac address [format: xx:xx:xx:xx:xx:xx]: