Asus GigaX User Manual
Page 39
GigaX Series L3 Managed Switch User Guide
39
Select the corresponding interface and configure the interface
parameters. To save any changes and make it effective
immediately, click
. Use
to refresh the setting. The
field you changed will update the content in the display window.
By default, Layer 3 switching is disabled. You have to create and
activate Layer 3 interface(s) before enable Layer 3 switching. Up to 32
Layer 3 interfaces can be created in this switch.
Interface "sw0" is the system interface, which is default created by the
system and cannot be removed.
Check the [Remove] checkbox and click
if you want to
remove an interface from the select list.
Click
to make the setting effective. Click
to refresh
the settings to current value.
Figure 17. Interfaces