Asus GigaX - Manual (Page 63)

GigaX Series L3 Managed Switch User Guide
63
4.7.6 USM User
USM (User-based Security Model) User is used to configure the
information of SNMPV3 USM User.
Engine Id: enter the Engine Id that should match the ID in the
Manager.
Name: enter Name combined with Engine ID that should match the
Name and Engine ID in the Manager.
Auth Protocol: enter the Auth Protocol that Engine ID and Name
belong. Only NoAuth, MD5, SHA1 can be chosen. If the NoAuth is
chosen, there is no need to enter password.
Auth Password: enter the password that the Auth Protocol belongs.
The password needs at least 8 characters or digits.
Priv Protocol: enter the Priv Protocol that Engine ID and Name belong.
Only NoPriv, DES can be chosen. If the NoPriv is chosen, there is no
need to enter password.
Priv Password: enter the password that the Priv Protocol belongs. The
password needs at least 8 characters or digits.
Click on the when you create a new USM User entry by the
above information. Then you will see the new added entry shows in the
User window. You can remove the existed User by selecting the entry with
the mouse, then clicking on . The button updates the
existed USM User entries. Click to save effective. Click
to refresh the settings to current value. To make the
configuration effective, please go to "Save Configuration" page, then click
on .