Asus GigaX - Manual (Page 71)

GigaX Series L3 Managed Switch User Guide
71
• Multi-host: If enabled, ALL hosts connected to the selected port are
allowed to use the port if ONE of the hosts passed the authentication. If
disabled, only ONE host among other hosts passed the authentication
is allowed to use the port.
• Authentication Control: If 'force_authorized' is selected, the selected
port is forced authorized. Thus, traffic from all hosts is allowed to pass.
Otherwise, if 'force_unauthorized' is selected, the selected port is
blocked and no traffic can go through. If 'Auto' is selected, the behavior
of the selected port is controlled by 802.1x protocol. All ports should be
set to 'Auto' under normal conditions.
• Guest VLAN: Specify a guest VLAN to clients that are not
802.1x-capable.
Click to make the settings permanent. Click to
refresh the settings to current value.
Figure 42. Port Access Control