Asus GigaX - Manual (Page 90)

90
6: select port by source and destination IP
CLI command: l2 trunk create
[Add/Remove Trunk]
Trunk group port members can be added to or removed from an existing trunk
group.
CLI command : l2 trunk add
CLI command : l2 trunk remove
[LACP Action]
User can enable or disable LACP on a specific trunk group.
CLI command : l2 trunk lacp action
[LACP System Priority]
User can assign the system priority for running LACP.
CLI command : l2 trunk lacp syspri
[LACP Port Priority]
User can assign the port priority for running LACP.
CLI command: l2 port lacppri ports>[Reload]
Restores the previous saved settings of trunking from configuration file.
CLI command : l2 trunk retrieve
[Mirror Mode] [Enable/Disable]
[Monitor Port] [port number]
Displays the mirroring settings of the switch.
CLI command : l2 mirror create
CLI command : l2 mirror ingress