Samsung SGH-T719DSBTMB - Manual (Page 101)

Section 9: Settings 101
Security Settings
Once you have entered a new PIN, you are asked to confirm it by entering it
again.
Change password
This feature allows you to change your current password to a new one. It is
preset to 00000000 at the factory.
1. Enter the default password, 00000000, and press the OK soft key
or .
2. Enter a new 4- to 8-digit password and press the OK soft key or
.
3. Enter the new password again and press the OK soft key or .
FDN mode
FDN (Fixed Dialing Number) mode, if supported by your SIM card, allows you
to restrict your outgoing calls to a limited set of phone numbers.
The following options are available:
• Disable : you can call any number.
• Enable : you can only call phone numbers stored in the Phonebook.
You must enter your PIN2. You can obtain your PIN2 from your
service provider.
Change PIN2
The Change PIN2 feature allows you to change your current PIN2 to a new
one. You must enter the current PIN2 before you can specify a new one. Once
you have entered a new PIN2, you are asked to confirm it by entering it again.
Note : Not all SIM cards have a PIN2. If your SIM card does not, this menu does not
display.
t719.book Page 101 Thursday, June 29, 2006 1:44 PM