Samsung EK-GC110ZKAXAR User Manual
Page 78
74
VPN
The VPN settings menu allows you to set up and manage
Virtual Private Networks (VPNs).
Important! Before you can use a VPN you must establish and
configure one.
Before you add a VPN you must determine which VPN
protocol to use: PPTP
L2TP/IPSec PSK, L2TP/IPSec RSA, IPSec Xauth PSK, IPSec
Xauth RSA, IPSec Hybrid RSA.
1. Before using VPN, you must first set up a screen unlock
PIN or password. For more information, refer to “Lock
2. From the Home screen, tap
➔ Settings ➔ More
settings ➔ VPN.
3. Tap Add VPN network.
4. Enter a name for the VPN network in the Name field.
5. Select a VPN type from the Type drop-down menu.
6. Enter the Server address and any other required fields
that are dependent upon the Type you entered
previously.
7. Tap the PPP encryption (MPPE) check box if desired.
8. Tap the Show advanced options check box to display
additional VPN options.
9. Tap Save to save your VPN settings.
Nearby devices
This option allows you to share your media files with nearby
devices using DLNA and connected to the same Wi-Fi.
1. Connect to a Wi-Fi network. For more information, refer
to “Activating Wi-Fi” on page 71.
2. From the Home screen, tap
➔ Settings ➔ More
settings ➔ Nearby devices.
3. Verify Wi-Fi Direct is enabled and you are paired with
the device you wish to detect and share content with.
4. Tap the File sharing checkbox to create a checkmark
and activate File sharing.
5. Verify
(Nearby devices) appears at the top of the
screen.
6. At the Nearby devices prompt, tap OK.
7. Tap Shared contents, then check the media you would
like to share. Tap OK.