Samsung SPH-L710RWPSPR - Manual (Page 114)

Tap More networks > VPN, and then tap to add a VPN. Depending on the type of 2.
VPN, this may include these options:
 Name: Enter the name of the VPN.
 Type: Choose the type of VPN, from PPTP, L2TP/IPSec PSK, L2TP/IPSec RSA,
IPSec Xauth PSK, IPSec Xauth RSA, or IPSec Hybrid RSA.
 Server address: Enter the VPN server address.
 PPP Encryption (MPPE): Tap to enable, if applicable for the VPN.
 Show advanced options: Tap to set other options, depending on the type of VPN.
3. Tap Save to save the VPN.
NFC Settings
Use NFC (Near Field Communication) to share information between your device and another
NFC device by touching the devices together, typically back-to-back.
NFC is used with S Beam and Android Beam, and must be turned On to use these features.
Turn NFC On or Off
Use NFC (Near Field Communication) to share information between your device and another
NFC device or NFC tag, by touching the devices together, typically back-to-back.
1. Press and then tap > Settings > Connections.
2. Tap the ON/OFF switch beside NFC to turn NFC On or Off.
Android Beam
With Android beam, you can transmit app content via NFC to other NFC devices that support
Android Beam.
Android Beam uses NFC, so NFC must be turned On before you can turn on Android Beam.
1. Press and then tap > Settings > Connections.
2. Tap the ON/OFF switch beside NFC to turn NFC On. NFC must be on to use Android
Beam.
3. Tap NFC to access Android Beam settings, and then tap the ON/OFF switch beside
Android Beam to turn Android Beam On or Off.
Settings 103