Vo ice ser vice s, Adapting digit dial – Samsung SEPA920WSAQST User Manual
Page 131
Section 2H: Using Your Phone’s Voice Services
109
V
o
ice Ser
vice
s
Adapting Digit Dial
Digit Dialing is speaker independent, which means that no training or
adaptation is required. Some users with heavy accents or unusual voice
characteristics may find difficulty in achieving high accuracy with speaker-
independent Digit Dialing, so the Adapt Digits feature allows users to
dramatically improve the digit accuracy through adaptation. Users who get
acceptable digit recognition accuracy will find no additional benefit to
performing the Adapt Digit adaptation.
After you adapt Digit Dial, your phone will be customized to your voice.
Other people will not be able to use Digit Dial on your phone unless they
reset the phone to factory defaults.
Adaptation involves recording several digit sequences to teach the system
your voice. The adaptation process takes about three minutes.
Tips for adapting Digit Dial:
ⅷ
Adapt digits in a quiet place.
ⅷ
Make sure you wait for the beep before starting to speak.
ⅷ
Speak clearly, but say each digit sequence naturally.
ⅷ
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, you can say or select
No when the prompt asks, “Did the recording sound OK?” You will
then be prompted to rerecord the sequence.
To adapt Digit Dial to your voice:
1.
Menu > Settings > Voice Service.
2.
Select Digit Dialing and press
.
3.
Select Adapt Digits and press
to begin. (The phone displays
the first digit sequence.)
4.
Wait for the beep, and then repeat the digits using a normal tone of
voice. (The phone plays back your recording and asks you if the
recording sounds “OK.”)
Note:
Adapt Digit Dial
ONLY
if the system is frequently misrecognizing your
speech. You can always restore the system to its original factory setting.