Samsung SCX-8128NA-XAA - Manual (Page 72)

Faxing (optional)_ 72
• 1 Sided: For originals that are printed on one side only.
• 2 Sided, Book: For originals that are printed on both sides.
• 2 Sided, Calendar: For originals that are printed on both sides, but
the back is rotated 180 degrees.
To use 2 Sided, Book and 2 Sided, Calendar, load the originals
on the DADF. If the machine cannot detect the original on the
DADF, it automatically changes the option to 1 Sided.
3. Press OK from the display screen.
Selecting the orientation of originals
When faxing double-sided documents, specify the document orientation.
Otherwise, the faxes may not be printed in the correct page order or correct
front and back page arrangement.
1. Press the Advanced tab > Original Orientation, then set the original
orientation.
2. Press the appropriate option.
• Upright Images: Select this setting for an original document loaded
with the top toward the back of the machine.
• Sideways Images: Select this setting for an original document
loaded into the DADF with the top of the original document toward
the left side of the machine, or an original document placed on the
scan glass with the top of the original document toward the right side
of the machine.
3. Press OK from the display screen.
Changing the resolution
The default document settings produce good results when using typical
text-based originals. However, if you send originals that are of poor quality,
or contain photographs, you can adjust the resolution to produce a higher
quality fax.
Press left/right arrow to toggle the values.
• Standard: Usually recommended for originals with text. This option will
reduce the transmission time.
• Fine: Recommended for the originals containing small characters, thin
lines, or text that was printed using a dot-matrix machine.
• Super Fine: Recommended for originals containing fine detail. This
option is enabled only if the receiving machine also supports Super Fine
resolution.
• Ultra Fine: Recommended for originals containing extremely fine detail.
Using the DADF Using the scanner
glass
Icon
Using the DADF Using the scanner
glass
Icon