beautypg.com

Applications settings – Samsung SGH-A767LBAATT User Manual

Page 86

background image

82

• Auth Type: select the type of authentication used for this WAP

connection: None, Normal, or Secure.

• User ID: enter the User ID required to connect to the network.

• Password: enter the user password required to connect to the

network.

• Protocol: set the connection protocol used by the WAP browser:

WAP, HTTP, or Other.

• Home URL: enter the URL address of the page to be used as your

homepage.

• Proxy address: MEdia Net set as the proxy server address and

port.

• Linger Time (Sec.): set a time period (in seconds) after which the

network is disconnected if there has been no new data traffic in that
time.

• Advanced Settings: allows you to configure some of the IP-

specific information: Static IP, Static DNS, Server information, and
Traffic Class.

Static IP: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.

Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.

Traffic Class: select the traffic class.

Note: The WAP settings may vary depending on the service provider.

IMS Settings

IMS is the method used to connect to the server in order set up
the Video Share option.

Service

: allows you to set the IMS service to On or Off.

Important!: If you reset the IMS Service to Off, you will not be able to use the

Video Share option.

Profile: allows you to set the server that service is coming from.

Important!: If you change from the default AT&T IMS, you may not be able to

use Video Sharing.

Applications Settings

The Applications Settings feature allows you to configure the
functional parameters for most of the onboard applications.
These applications are described in more detail within other
sections of this manual.

1.

In Idle mode, press the Menu soft key, then select Settings

Applications Settings.

2.

Select the type of application which you want to change:

• Messaging Settings

This manual is related to the following products: