Samsung SGH-A767LBAATT User Manual
Page 85
Changing Your Settings 81
3.
Use the Up or Down Navigation key to highlight one of
these options:
• Ask on Connection: your handset presents a choice for which
USB mode you want each time the phone is connected to the PC.
• Media Player: sets the Media Player to launch as the default
application when a USB connection is detected.
• PC Studio: is set to launch PC Studio as the default application
when a USB connection is detected. For a free download of PC
Studio, go to www.samsung.com.
• Mass Storage: sets the USB connection to a mass storage
device such as a portable USB drive.
4.
With the application highlighted, press the Select soft key
or press
.
Configuring your Phone’s Network Profiles
Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection can be made via either one of three
available WAP browsers: Media Net, AT&T MMS (MultiMedia
Server), and AT&T IMS. You need these settings to use the web
browser or send MMS messages or Emails.
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although the
active connection can be changed by the user, it is recommended
that this choice be made with the assistance of either the retailer
or customer service representative.
1.
In Idle mode, press the Menu soft key, then select Settings
➔
Connectivity
➔
Network Profiles.
2.
Highlight one of these options:
• MEdia Net
• AT&T MMS
• AT&T IMS
Note: The MEdia Net WAP is pre-configured and cannot be altered on this
screen. The AT&T MMS connection option can be edited, renamed, or
deleted on this screen. Your phone is set up by default for connecting
to the network. If you change the settings without first checking with
your service provider, the web browser, MMS, and e-mail features may
not work properly.
3.
To create a new connection, press the Options soft key,
then select New.
- or -
To edit the existing AT&T MMS, highlight this entry, press
the Options soft key, then select Edit.
4.
Select the parameter you want to edit:
• Set Name: enter a profile name.
• Access Name: edit the access point name.