Samsung SGH-A767LBAATT - Manual (Page 130)

126
Changing the WAP Profiles
Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection can be made via either one of three
available connection profiles: MEdia Net, AT&T MMS (MultiMedia
Server), or AT&T IMS. Use this menu to create and customize the
profiles containing the settings for connecting your phone to the
network. You need these settings to use the WAP browser or to
send MMS messages or Email messages. Although the active
connection can be changed by the user, it is recommended that
this choice be made with the assistance of either the retailer or
customer service representative.
1. In Idle mode, press the Menu soft key, then select MEdia
Net ➔ Browser Settings.
2. Use the Up or Down Navigation key to highlight one of
these connection profiles:
• MEdia Net
• AT&T MMS
• AT&T IMS
Caution!: The WAPs are pre-configured and can not be altered using this
screen. The MMS connection option can be edited, renamed, or
deleted using this screen. Your phone is set up by default for
connecting to the network.
If you change the settings without first checking with your service
provider, the web browser, MMS, and e-mail features may not
work properly.
3. To create a new connection profile, press the Options soft
key and select New.
- or -
To edit an existing profile, highlight the profile, press the
Options soft key, and select Edit.
4. Select each parameter you want to edit:
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the
network.
• Protocol: set the connection protocol used by the WAP browser:
WAP or HTTP.
• Home URL: enter the URL address of the page to be used as your
homepage.
• Gateway address: (WAP only) enter the gateway address of the
proxy server.
• Proxy address: (HTTP only) set the proxy server address and port.