Samsung SC-HMX20C-XAA - Manual (Page 57)

English _ 45
connection
You can view the recorded movie and photo images on a large screen by connecting the HD camcorder to an HDTV or
normal TV.
CONNECTING TO A TV
Before connecting to a TV
• Depending on your TV and cables that are used, the connection method and resolution may differ.
• For more information about the connection, refer to your TV’s user manual.
• Use the supplied AC power adaptor as the power source. page 16
Connecting to a high definition TV
• To play back the HD-quality (1920x1080) movie images, you need a high definition TV (HDTV).
• Method 1: Connect your HD camcorder to a TV with an HDMI cable. (The HDMI cable is an optional accessory.)
If an HDMI cable is used, power must be supplied to the cradle through the AC power adaptor.
Note: The HDMI jack is located on the Cradle.
• Method 2: Set the output signal for TV using the “Component Out” function. page 77
• About HDMI (High Definition Multimedia Interface)
HDMI carries both video and audio signals over one cable and supplies high quality images and sound.
• The HDMI jack on your HD camcorder is for output use only.
• You can use the Anynet+ function by connecting the HD camcorder to a Samsung Anynet+ supported TV with the HDMI cable.
Refer to the corresponding TV’s user manual for more details.
• When the HD camcorder is connected to the Anynet+ supported TV with an HDMI cable, the TV automatically turns on. (It is one of the
Anynet+ functions.) If you do not want to use Anynet+ function, set “Anynet+ (HDMI-CEC)” to “Off.” page 79
• When an HDMI cable is connected, it will override all other connections.
• When using HDMI, the TV type is recognized and the video output resolution of the camcorder is automatically set. Manual setting is not
necessary.
Method 1
COMPONENT IN
Y Pb Pr L R
AUDIO IN
HD camcorder
Signal flow
HD TV
HDMI cable
COMPONENT IN
Y Pb Pr L R
AUDIO IN
Method 2
HD camcorder
Signal flow
Component cable
HD TV
Cradle