Samsung SC-HMX20C-XAA - Manual (Page 37)

English _ 25
Setting the date and time
Set the date and time when using this HD camcorder for the first time.
1. Touch the Menu ( ) tab.
2. Touch the Settings ( ) tab.
3. Touch the up ( )/down ( ) tab until “Date/Time Set” is displayed.
4. Touch “Date/Time Set.”
5. Touch the up (
)/down ( ) tab to set current month, then touch day field.
6. Set values for day, year, hour, minute, and AM/PM as in setting the month.
7. Touch the OK (
OK
) tab when the date and time setting is completed.
• The message “Date/Time set” appears, and the set date/time is applied.
• If you touch the Exit ( ) tab before the Date/Time is set, the menu disappears and
the Date/Time is not saved, and when touching the Return ( ) tab, the message
“Date/Time set is not changed” appears.
8. To exit, Return ( ) tab repeatedly until menu disappears.
• On charging the built-in rechargeable battery
Your camcorder has a built-in rechargeable battery to retain the date, time, and
other settings even when the power is off. The built-in rechargeable battery is
always charged while your camcorder is connected to the wall outlet via the AC
power adaptor or while the battery pack is attached. The rechargeable battery
will be fully discharged in about 6 months if you do not use your camcorder at all.
Use your camcorder after charging the built-in rechargeable battery. If the built-
in rechargeable battery is not charged, any input data will not be backed up and
the date/time appears on the screen as “JAN/01/2008 12:00 AM” (when “Date/
Time” display is set to On).
• You can set the year up to 2038.
Turning the date and time display on/off
To switch the date and time display on or off, access the menu and change the date/time display mode. page 72
STBY 00:00:00 [70Min] 80
Min
OK
Date/Time Set
12
01
00
2008
AM
Month Day Year
JAN
Date/Time Set
Date/Time
Date Type
File No.
1 / 6
80
Min