Samsung SECR450ZRAMTR - Manual (Page 80)

77
Self Timer — Delays the camera shutter by either 2,
5, or 10 seconds after you press Take (
or ).
Multi Shot — Automatically takes
multiple pictures in sequence after
you press Take (
or ).
Camera Shortcuts
You can use the Navigation key or the Arrow keys to quickly
access both the Brightness and Zoom capabilities of the built-in
camera. When you exit the camera mode, all camera settings
return to default values.
Brightness
1. In camera mode, change the brightness of your pictures
using the Up and Down navigation/arrow keys. Options are
+4 – -4.
2. Press Take ( or ) to take the picture.
Zoom in on a Subject
Your camera has digital zoom capabilities of up to x8 with
Resolution set to 480x640 and below.
Note: Pictures may appear somewhat grainy as you zoom in; this is a normal
result of digital enhancement.
Note: The Zoom setting is affected by the Resolution setting (camera mode).
With Resolution set to 960x1280, no zoom is available. With Resolution
set to 480x640 and lower, Zoom settings 0 – 8 are available.
1. In camera mode, press the Left and Right navigation/arrow
keys to zoom in and out on your subject.
2. Press Take ( or ) to take the picture.
Camera Options
The Camera Options let you temporarily override your default
camera settings. Any settings you change using the Camera
Options only apply to the current camera session or until you
make another change using the Camera Options.
Delay Pictures with the Self Timer
Self Timer lets you delay a picture long enough so you or the
person taking the picture can join others in the picture.
1. In camera mode, press the Options soft key. The following
options appear in the display:
• Self Timer
• Multi Shot
• Quality
• Resolution
• White Balance
OK
OK
OK
OK