Samsung SECR450ZRAMTR - Manual (Page 21)

Understanding Your Phone 18
• To disable Speakerphone Mode:
ᮣ Press and hold until “Speakerphone Off” appears in
the display.
Note: Your phone automatically enters Speakerphone Mode when you dial a
call using the QWERTY keypad and the called phone begins ringing.
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
• To enter Silent Mode:
ᮣ In standby mode, press and hold . “Entering Silent
Mode” briefly appears in the display and your phone
returns to standby mode.
• To exit Silent Mode:
ᮣ While in Silent mode and standby mode, press and hold
. “Exit Silent Mode” briefly appears in the display
and your phone returns to standby mode.
Vibrate Mode
ᮣ In standby mode, repeatedly press the volume key
( ) down until Vibrate appears in the display.
The volume key is on the upper right side of phone.
Adjust the Ringer
1. In standby mode, press the volume key ( ) on the
right side of the phone up or down. Options are:
2. When you are satisfied with the setting, press or .
Your phone returns to standby mode.
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the
Menu key ( ), then pressing the , , , and
keys. Use the Volume key on the right side of your phone to adjust the
ringer volume setting.
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The Vibrate/Ring icon ( ) appears in the display
when the phone is in Vibrate/High mode.
• Ringer Off • Medium
• Vibrate • Medium/High
• Low • High
• Low/Medium • Vibrate/High
OK
OK