Samsung SECR450ZRAMTR - Manual (Page 115)

Settings 112
System Select
The System Select feature enables you to automatically or
manually select the network used when roaming outside of your
home area.
1. From the Settings menu, select Phone Settings ➔
System Select.
The following roaming options appear in the display:
• MetroPCS only — Roaming is OFF. If your home system is not
available then your call will not be connected, and the no service
icon (
) appears in the display. In some service areas, an
operator may come on-line and ask you how you would prefer to
pay for the call.
• Automatic — Roaming is ON. It will always try your calls using the
Preferred Roaming List (PRL) loaded into your phone. If a preferred
service is not found, then this option will attempt to acquire any
digital service.
2. Select the desired Roam setting.
The Phone Settings menu appears in the display.
Set Time
Use the Set Time option to set the current time and date.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
With Airplane Mode set to On, the Set Time feature is enabled.
1. From the Settings menu, select Phone Settings ➔ Set
Time. The following options appear in the display:
• Set Time
• Set Date
2. Select Set Time. The Set Time screen appears in the
display.
3. Enter the current time using your keypad:
• The hour and minute must be entered using two digits each. You
must enter the hour in 12-hour format.
• Use the Left and Right navigation keys to select am or pm.
4. Press OK ( or ) to save the time. The following
options appear in the display:
• Set Time
• Set Date
5. Select Set Date. The Set Date screen appears in the
display.
OK