Maximum Wireless Rainwatch (pre-2012) - Manual (Page 5)

1
2
The switch closest to the front of the case selects which counter
(memory) you wish to display. Regardless of this switch's
position, both counters are accumulating data.
The push button switch closest to the rear of the case is the
reset switch. This switch resets either counter when you desire.
The front toggle switch position determines which memory you
wish to erase.
RAINWATCH has two "counters". They are shown on the face of the instrument as "Current" and "Total".
There are two switches located at the bottom of the case.
A. Pushing the select switch to the left and holding the push
button switch for six seconds erases "Current".
B. Pushing the select switch to the right and holding the push
button switch for six seconds erases "Total".
RAINWATCH
OPERATION
WIRELESS
30 Barnet Boulevard
New Bedford, MA 02745
(508) 995-2200
Page 5
IMPORTANT FACTS ABOUT YOUR RAINWATCH
An illuminated battery monitor LED indicates that the battery is in good condition.
During a power failure, RAINWATCH will continue to collect and store data as long
as the battery is in good condition.
Leaving the transmitter set in test mode will drain the batteries in 2-3 months vs..
1-2 years in normal mode.
Freezing weather will not damage the unit, however, readings of snow or freezing
will no be accurate.