Maximum Wireless Rainwatch (pre-2012) - Manual

GREEN RED
BROWN
YELLOW
BROWN
1
RAINWATCH
INST TION ALLA
WIRELESS
Page 1
30 Barnet Boulevard
New Bedford, MA 02745
(508) 995-2200
THIS MANUAL IS DESIGNED TO LEAD YOU STEP BY STEP THROUGH THE PROCEDURES REQUIRED
TO TEST, INSTALL AND USE YOUR WIRELESS RAINWATCH. BY FOLLOWING THESE PROCEDURES AND
SETTING UP THE SYSTEM CORRECTLY IN THE BEGINNING, YOU WILL BE ABLE TO ENJOY ALL THE
FEATURES OF YOUR WIRELESS RAINWATCH FOR YEARS TO COME. WE STRONGLY SUGGEST THAT
YOU PERFORM A TRIAL WIRING OF YOUR WIRELESS RAINWATCH PRIOR TO FINAL INSTALLATION.
AC
ADAPTER
WHITE
GREEN
RED
YELLOW
BLACK
WHITE
GREEN
RED
RAINWATCH
RECEIVER
BROWN
YELLOW
BLACK
Wire the receiver to the RAINWATCH display unit. Connect
the
and wires from the RECEIVER to the
power terminals on the back of the RAINWATCH (the polarity
does not matter). Connect the
wire from the
RECEIVER to TERMINAL #4 and the wire from
the RECEIVER to TERMINAL #5 on the rear of the
RAINWATCH indicator.
RED GREEN
YELLOW
BROWN
2
Connect a 9 volt alkaline battery to the battery snap and
insert into the opening under the terminal strip as shown.
Now plug in the power supply.
3
Back out the four screws holding the
base to the collector and rotate the
collector to remove it from the base.
RECEIVER WIRING
YELLOW
GREEN
RED
BROWN
.................to........Power (no polarity)
............to........Power (no polarity)
.........to........Rainwatch
...........to........Rainwatch
RED
GREEN
YELLOW
BROWN