Maximum Rainwatch User Manual

Rainwatch, Installation

Page 1

30 Barnet Boulevard

New Bedford, MA 02745

(508) 995-2200

RAINWATCH

INSTALLATION

PROPER INST

ATION IS IMPORTANT. IF Y

ALL

OU NEED ASSISTANCE, CONSULT A CONTRACTOR, ELECTRICIAN

OR TELEVISION ANTENNA INSTALLER (CHECK WITH YOUR LOCAL BUILDING SUPPLY, OR HARDWARE STORE

FOR REFERRALS). TO PROMOTE CONFIDENCE, PERFORM A TRIAL WIRING BEFORE INSTALLATION.

Select a level surface
in an open area above
ground to mount the
collector. Some examples
would be a deck or tree
stump.

Rotate the collector
to remove the cover from
the base. Taped to the base
you will find the necessary
mounting screws to secure the
base to your chosen mounting surface.

If the collector is not mounted absolutely level
your readings will be incorrect.

Make sure that the plastic screen is in position in the collector.

Run the wire into the house using insulated cable clips. Form
a drip loop where the wire enters the house and caulk the feed
through hole when done.

DRIP

LOOP

CAULK

CABLE

CLIP

MIN