Campbell Scientific Solar1000 Station - Manual (Page 61)

Required Concrete Pad
Dimensions (see note 2):
24 x 24 x 24 in. (61 x 61 x 61 cm)
Crossarm Height (attached to mast)
Standard:
10 ft (3 m)
Maximum (mast
fully
extended): ~12 ft (3.7 m)
Minimum: ~9 ft (2.7 m)
Wind Load Recommendation
(see
note 3): 110 mph maximum
Pipes Outer Diameter (OD)
Vertical:
1 in. (2.5 cm)
Cross Support: 0.375 in. (0.953 cm)
Leg Spacing: 10.25 in. (26 cm) between legs
(center to center)
Material: Aluminum
Shipping Weight: 40 lbs (18 kg)
Notes:
1. Refer to the "Instrumentation Mounts" product brochure for crossarm, solar radiation mounts, and radiation shield options.
2. Th e concrete pad requirements assume heavy soil; light, shift ing, or sandy soils require a larger concrete pad.
3. Th e wind load recommendation assumes proper installation, proper anchoring, adequate soil, and total instrument projected area of less
than 2 square feet. Th e amount of wind load that this mount can withstand is aff ected by quality of anchoring and installation, soil type,
and the number, type, and location of instruments fastened to the UT10.
UT10 Specifi cations
HMP45C-L6 Temperature and RH Probe
housed in a Radiation Shield
5-ft Grounding Rod (included w/UT10)
Hinged Base (included w/UT10)
User-supplied Concrete Pad
Wind Sentry Set
Crossarm
Lightning Rod (included w/UT10)
TE525-L50 Tipping Bucket Rain Gage
Solar Panel
LI200X Pyranometer,
Pyranometer Crossarm Stand,
LI2003S Pyranometer Base and Leveling Fixture
Environmental Enclosure
Anchor Bolts (included w/UT10)
Anchor Bolt (included w/UT10)