beautypg.com

Campbell Scientific Solar1000 Station User Manual

Page 11

background image

CM106 Tripod

(6) Bolts

Tab

Mast

FIGURE

1.5-4. Mast Attachment to Tripod Base

Loosen the nine bolts shown in Figure

1.5-4. Slide the mast into the tripod base,

making sure that it extends below the lower bolts and rests on the tab. Tighten
the six bolts to secure the mast.

Plumb the tripod by adjusting the northeast and south facing legs. With a level
on the East side of the mast, adjust the Northeast leg for plumb. With the level
on the South side of the mast, adjust the South leg for plumb. Tighten the
T-knobs after the adjustments have been made.

7