Campbell Scientific Solar1000 Station - Manual (Page 43)

7. CMP6-L, CMP11-L, and CMP21-L
Pyranometers
6.1. Introduction
CMP-series pyranometers are designed for continuous outdoor monitoring of
solar radiation intensity. A flat spectral sensitivity from 285 to 2800 nm
enables accurate measurements in natural sunlight, under plant canopies, and
in green houses or buildings. When inverted, these pyranometers can measure
reflected solar radiation. Uses include monitoring global horizontal irradiance
(GHI) and plane of array irradiance (POA). Diffuse sky radiation can also be
measured with the use of a shade mechanism.
CMP-series pyranometers are manufactured by Kipp & Zonen, and cabled by
Campbell Scientific.
Before using these pyranometers, please study:
• Section 2, Cautionary Statements
• Section 3, Initial Inspection
• Section 4, Quick Start
More details are available in the remaining sections.
7.2. Cautionary Statements
• CMP-series pyranometers are rugged, but they should be handled as
precision scientific instruments.
• Care should be taken when opening the shipping package to not damage
or cut the cable jacket. If damage to the cable is suspected, consult with a
Campbell Scientific applications engineer.
7.3. Initial Inspection
Check the contents of the shipment. If there is a shortage (see Section 7.3.1,
Ships With), contact Campbell Scientific. If any damage has occurred during
transport, immediately file a claim with the carrier and contact Campbell
Scientific to facilitate repair or replacement.
The model number and cable length are printed on a label at the connection
end of the cable. Check this information against the shipping documents to
ensure the correct product and cable length are received.
39